Other Components           

Elbows

Seamless/welded, Dimensions DIN 2605 Table 1 (ISO 4200), 45°, 90°, 180°,

Types 2, 3, 5, special radii, short radius (SR), long radius (LR), Materials: carbon

steels, boiler steels, fine grained steels, (highly) heat-resistant steels acc. to

EN 10253, ASTM/ASME (e.g. P235GH, P265GH, 16Mo3, 13CrMo4-5)

DN15 - DN1200; ½“ - 48“; 21,3 - 1219 mm

Fittings

Tees: with equal and reduced branch, series 1-6, acc. to EN 10253, ASTM/ASME,

(e.g.: St35.8I, St35.8III,16Mo3, P235GH-TC1, 13CrMo4-5, 10CrMo9-10, 1.4541,

1.4571, 1.4307, 1.4401, 1.4404, 1.4539, Duplex 1.4462, Super Duplex 1.4410);

DN25 - DN1200; 21,3 - 1219 mm equal; 26,9/21,3 - 1219/1016 mm reduced

Vessel heads: Torispherical heads DIN 28011 / ASME F&D (flanged and dished);

semi ellipsoidal heads DIN 28013; convex discs/dished plates (acc. to caps EN

10253; S235, P265GH, 16Mo3, 13CrMo4-5,10CrMo9-10, P355N…, WPB, WP…,

1.4307, 1.4404, 1.4539, 1.4541,1.4571, 1.4828;

DN15 – DN1200; 21,3 - 1219,0 mm; wall 2,0 - 60,0 mm

Reducers: Seamless/welded, concentric/eccentric, series 1-8, acc. to EN 10253,

(e.g. St35.8I, St35.8III, 16Mo3, P235GH-TC1, 13CrMo4-5, 10CrMo9-10, 1.4541,

1.4571, 1.4307, 1,4401, 1.4404, 1.4539, Duplex 1.4462, Super Duplex 1.4410)

Olets/Outlets: In different pressure levels and wall thicknesses - according to

ASME B36.10 resp. B 36.19 and ISO/DIN

Types: Weldolet, Sockolet, Thredolet, Latrolet, Elbolet, Nipolet, Sweepolet

 Flanges

acc. to EN 1092-1 (also ANSI, GOST,JIS as well as other international standards

or according to customer drawings; materials: e.g. P235GH, P250GH, P265GH,

16Mo3, 13CrMo4-5, 1.4541, 1.4571,TP316L, TP304L 

Types: Plate flanges 01, Blind flanges 05, Weld-neck flanges 11, Threaded

flanges 13,Loose plate/lap joint flanges 02/04 in conjunction with to be welded

collars or stub ends, ASME flanges (pressure classes #3000, #6000 and #9000);

PN2,5 - PN400; DN10 - DN4000; SCH5 - SCH16; ¼“ - 40“

Turned Parts

Ready-turned and milled parts from solid metal or tubes, including different processing phases (grinding, thread rolling, broaching, gear cutting, grooving, lapping, deep drilling, welding and assembly), and surface treatments (hot-dip galvanizing, galv. zinc, anodizing, phosphating, burnishing,  cataphoresis, chroming, Dacromet, Teflon coating, plasma and ceramic coating, curing nitruration, nitrocarburizing, chemically nickel and others); up to 1000 mm diameter; single-item, initial samples and series orders   

Materials: Structural steel, stainless steel, hardened and tempered steel, special steel (e.g. Duplex, Inconel and others), aluminum, bronze, cast alloys, plastics

Bright steel

Cutting steel, carbon steel, stainless steel, drawn, grinded

round, flat, square, rectangular, hexagonal

Stamping Parts

Punched, bent, molded, embossed, perforated, rolled; acc. to drawing